SKF BC1-0547 B 圆柱滚子轴承 50×90×30 mm斯凯孚 · 瑞典
圆柱滚子轴承 · 主要尺寸 50×90×30 mm

SKF BC1-0547 B 技术参数
| 尺寸 | |
| 孔径 | 50 mm |
|---|---|
| 外径 | 90 mm |
| 宽度 | 30 mm |
| 性能 | |
| 基本额定动荷 | 73.5 kN |
| 基本额定静负荷 | 69.5 kN |
| 参考转速 | 7500 r/min |
| 极限转速 | 9000 r/min |
| 属性 | |
| 轴承部件 | 整套轴承 |
| 轴向位移能力 | 两个方向上 |
| 列数 | 1 |
| 定位特征,轴承外圈 | 不带 |
| 孔类型 | 圆柱孔 |
| 保持架 | 机削铜 |
| 内圈加长 | 两侧 |
| 法兰数量,外圈 | 2 |
| 挡边数量,内圈 | 0 |
| 活套法兰 | 无 |
| 径向游隙 | C3 |
| 公差等级 | 正常 |
| 涂层 | 不带 |
| 密封 | 不带 |
| 润滑剂 | 无 |
| 补充润滑功能 | 不带 |
| 新产品的指示性碳足迹 | 2.3 kg CO<sub>2</sub>e |
产品说明
- 径向承载能力较高
- 低摩擦
- 使用寿命长
- 可承受双向轴向位移
- 可分离设计
Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and no flanges on the inner ring, NUB design bearings can accommodate axial displacement in both directions. The inner ring is extended on both sides, enabling larger axial displacements. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.